Pipe Support Profile Roll Forming Machine
The Main roll former about the pipe support profile roll forming machine can produce 41×41mm and 41×21mm pipe support profile at same machine.
When the profile is changed, operator needs to adjust some roller spacer bush and change some forming rollers, and then the profile can be changed well.
pipe support profile roll forming machine Components List
| Motor decoiler | 1 set (decoiler capacity is 2 tons) |
| Leveler&feeder | 1 set |
| Puncher | 1 set |
| Hydraulic Cutter | 2 sets |
| Main roll former | 1 set |
| Hydraulic Cutter | 1 set (flying cutter model) |
| Hydraulic station | 1set |
| PLC control system | 1 set |
| Final products rack | 1set (total length is 6 meters) |
pipe support profile roll forming machine Technical Specification
| Raw material | Galvanized steel plate (yield strength: 235Mpa) |
| Coil | according to final test data |
| Coil thickness | 1.8~2.0mm |
| Coil ID | ￠508±20mm |
| Coil OD | ≤￠1200mm |
| Coil max weight | 2 Tons |
| Line working speed | 12m/min (not include cut time) |
| Each piece final products length tolerance | ±2.0mm |
| Roll forming line power source | 380V/50Hz/3 Phase |
pipe support profile roll forming machine Working Flow
De-coiler-leveler&feeder-puncher- roll former-cuter-final products output
pipe support profile roll forming machine
Layout drawing and Profile drawing:
Finished products for pipe support profile roll forming machine
Tags: Pipe Support Profile Roll Forming Line| Pipe Support Profile Roll Former| Color Coated Profile Roll Forming Machine| Galvanized Steel Profile Roll Forming Machine
