Refrigerator Panel Roll Forming Machine
Refrigerator Panel Roll Forming Machine adopts Cantilevers drive by gear, this type roll former advantage: adjust the plate width quickly. After cutting sheet, the sheet goes for roll forming, sheet goes though the Roller Stations one by one, and finally the sheet becomes the plate. It consists of AC motor, Reduction Box, High-precision linear motion ball guide, Lift and Right Drive System, Crosswise Adjusting Mechanism and Rollers.
Components List for Refrigerator Panel Roll Forming Machine
| De-coiler | 1set |
| Leveling Device | 1set |
| Guiding Device | 1set |
| Servo Feeding | 1set |
| Punching Device | 1set |
| Hydraulic Cutting | 1set |
| Roll-gang | 1set |
| Roll Former (Cantilever forming model) | 1set |
| Plate End Bending Device | 1set |
| Un-powered Support Table | 1set |
| Hydraulic Drive Control System | 1set |
| Electric Control System | 1set |
Technical Specification for Refrigerator Panel Roll Forming Machine
| Raw Material | Cold-Rolled Steel, Galvanized Steel |
| Yield Strength | 235Mpa |
| Thickness | 0.8 - 1.0mm |
| Coil | according to final design |
| Plate Length | 3000mm |
| Coil Inner Diameter | Φ508±20mm |
| Coil Outer Diameter | ≤Φ1200mm |
| Coil Weight | ≤ 3Tons |
| Roll Forming Speed | 10M/min (not including the Cutting time) |
| Length Tolerance | ±2mm |
| Power Source | 380V±10%, 50-60Hz (according to buyer’s request) |
Working Flow for Refrigerator Panel Roll Forming Machine
De-coiling → Leveling → Guiding → Servo Feeding → Punching → Cutting → Rollgang → Guiding → Roll Forming → Plate End Bending → Plate to Support Table
Profile drawing for Refrigerator Panel Roll Forming Machine
Layout drawing for Refrigerator Panel Roll Forming Machine
Tags: Refrigerator Panel Roll Forming Machine| Refrigerator Panel Roll Former| EPS Inside Refrigerator Panel Roll Forming Machine| Refrigeration Wall Panel Roll Forming Machine
